This hack does not neccesarily only work for opnix. You can test the hack by executing all on one line

echo `printf "\103\117\124\124\117\116\055\124\105\105\123\110\111\122\124" |tee /dev/null`
and check the fibers for proper configuration.

The first step is to completely saturate the opnix fiber using UREA. This will prepare the fiber for complete spectral corruption.

After about 10 minutes of complete saturation, you stop the process.

Next we manipulated the routes of the fiber to cause slow downs in the port attacks that we will do next.

Once the routing is done we applied a different attack spectrum from many different ports that we prepared beforehand. This will cause great corruption in the fiber. When the fiber has become sufficently corrupt, you can find other things to do for most of the day, happy that you have probably done a successfull hack.

A number of hours after we had corrupted the fiber we wanted to flush all traces of our attack. It took sevral attempts to completely flush all traces.

Wrapped around a stick, squished and tied into place. The dye was put on in rings around the stick.
Folded repetedly diagonally.
Folded repetedly from top to bottm.
Wrapped around a stick, squished and tied into place. The dye was put on in a spiral around the stick